SPV, M23053/2 CLASS 2, 105C, 2:1 SHRINK RATIO, PVC HEAT SHRINK
Colors:
- 0 - Black
- C - Clear
-
Typical Properties
TYPICAL PROPERTIES
SPV SeriesPHYSICAL
Tensile Strength: 3000 PSI Ultimate Elongation: 300% Longitudinal Change: ±5% Secant Modulus (2%): 25,000 PSI Specific Gravity: 1.32 Heat Shock: (4 hrs. @ 180°C) - No dripping, cracking, passes mandrel wrap test Brittleness Temperature: -28°C Flammability: Self-extinguishing, meets UL 224 VW-1 Test Abrasion Resistance: Good
ELECTRICAL
Dielectric Strength: 750 V/mil Volume Resistivity: 10¹¹ ohm-cm min.
CHEMICALCorrosion Resistance: Non-Corrosive Fluid Resistance:
Fuels and Oils - Good
Solvents - Good
Acids & Alkalies - GoodWater Absorbtion: 1.0% Fungus Resistance: Non-nutrient
PVC TUBING 2:1 SHRINK RATIO
105°C Operating Temperature
DESCRIPTION:
WEICO's SPV series is a general purpose, flexible, extruded, PVC heat shrinkable tubing.The low shrink temperature tubing will recover to fifty percent of its supplied diameter when heated in excess of 100°C. It has excellent dielectric and mechanical properties and is oil and chemical resistant. It is typically used as an electrical insulation over connectors, cable splices and terminations. It is also useful for wire marker identification, bundling, wire harness coverings and covering irregular shapes.
CHARACTERISTICS:
SPV tubing has a 2:1 shrink ratio. When freely recovered, the tubing will shrink to 50% of its supplied diameter. SPV tubing meets MIL-I-23053/2 class 2. It is UL Recognized and CSA certified to 600 volts @ 105°C. SPV tubing is rated for continuous operation from -35°C to +105°C.
SPECIFICATIONS:
- UL recognized, CSA certified
- UL VW-1 and CSA OFT
- MIL-I-23053/2 class 2
- ASTM D 3150
PACKAGING:
- Spools
- Cut to customer specifications
*Click on a part number below for pricing and ordering online
| Min Temperature | -35°C |
|---|---|
| Max Temperature | 105°C |
| Voltage | 600V |
| Special | No |
| Weico No. | MILITARY NO. | EXPANDED ID. MIN (INCHES) | RECOVERED ID. MAX (INCHES) | RECOVERED NOM. WALL THICK. (IN) | |
|---|---|---|---|---|---|
| SPV-1/16 | M23053/2-202-X | .062 | .031 | .020 | |
| SPV-3/32 | M23053/2-203-X | .093 | .046 | .020 | |
| SPV-1/8 | M23053/2-204-X | .125 | .062 | .020 | |
| SPV-3/16 | M23053/2-205-X | .187 | .093 | .020 | |
| SPV-1/4 | M23053/2-206-X | .250 | .125 | .025 | |
| SPV-3/8 | M23053/2-207-X | .375 | .187 | .025 | |
| SPV-3/4 | M23053/2-209-X | .750 | .375 | .030 | |
| SPV-1 | M23053/2-210-X | 1.00 | .500 | .035 | |
| SPV-1 1/2 | M23053/2-211-X | 1.50 | .750 | .045 | |
| SPV-2 | M23053/2-212-X | 2.00 | 1.000 | .050 | |
| SPV-1/2 | M23053/2-208-X | .500 | .250 | .025 |
X - Denotes color coding
