HTG, 648C, UL RECOGNIZED, THERMAL CLASS 240, HEAT TREATED FIBERGLASS SLEEVING

Colors:
- N- Natural
- Consult Factory for other colors
-
Typical Properties
TYPICAL PROPERTIES
HTG SeriesPHYSICAL
Flammability: Self-extinguishing, passes Ul VW-1 flame test Specific Gravity: 2.55 Elongation: 4% Thermal Characteristics: HTG's one hundred percent fiberglass construction allows it to withstand temperatures to the melting point of glass, 1200°F. This tubing maintains its integrity up to this temperature, but colors may begin to fade at 400°F
ELECTRICAL
Dielectric Strength: Provides space factor insulation of approximately 1000V for Standard Wall. Volume Resistivity: 10 ohm-cm min.
CHEMICALCorrosion Resistance: Non-Corrosive Fluid Resistance: Impervious to Chemicals Water Absorbtion: None Fungus Resistance: Non-nutrient
HEAT TREATED FIBERGLASS SLEEVING
648°C Operating Temperature
DESCRIPTION:
WEICO's HTG is a braided fiberglass sleeving which has been heat treated to remove all organic matter and render it fray resistant. It provides maximum abrasion resistance with high flexibility. HTG sleeving is universally used as primary insulation in low voltage applications, particularly where high temperatures are encountered. It is also widely used as supplementary insulation and protection for other types of primary insulation. HTG is used wherever severe repeated flexing or temperature extremes prohibit the use of other materials. Typical applications include: insulation of carbon brush leads in electric motors; transformers and ballasts for halogen lighting fixtures; outer coverings for hydraulic lines; thermal or electrical insulation for onsumer, commercial or industrial appliances; double insulation for high reliability circuitry. This same sleeving can also be supplied with a light impregnant which further minimizes fraying and helps maintain a round cross section where this is desirable. The impregnated type is also available in colors. Both types are easily expanded for ease of installation.
CHARACTERISTICS:
HTG sleeving has an operating temperature of -60°C to +648°C. Saturated (impregnated) maintains its integrity through the same temperature range, but colors may begin to fade at +205°C
SPECIFICATIONS:
- UL Recognized
- Passes UL VW-1 flame test
- Thermal class 240
- Manufactured from fiberglass yarn conforming to military specification MIL-Y-1140
PACKAGING:
- Spools
- Cut to customer specifications
*Click on a part number below for pricing and ordering online
Min Temperature | -60°C |
---|---|
Max Temperature | 648°C |
Special | No |
Weico No. | SIZE | NOM. ID | |
---|---|---|---|
HTG-24 | 24 | .022 | |
HTG-22 | 22 | .027 | |
HTG-20 | 20 | .034 | |
HTG-19 | 19 | .038 | |
HTG-18 | 18 | .042 | |
HTG-17 | 17 | .047 | |
HTG-16 | 16 | .053 | |
HTG-15 | 15 | .059 | |
HTG-14 | 14 | .066 | |
HTG-13 | 13 | .076 | |
HTG-12 | 12 | .085 | |
HTG-11 | 11 | .095 | |
HTG-10 | 10 | .106 | |
HTG-9 | 9 | .118 | |
HTG-8 | 8 | .133 | |
HTG-7 | 7 | .148 | |
HTG-6 | 6 | .166 | |
HTG-5 | 5 | .186 | |
HTG-4 | 4 | .208 | |
HTG-3 | 3 | .234 | |
HTG-2 | 2 | .263 | |
HTG-1 | 1 | .294 | |
HTG-0 | 0 | .330 | |
HTG-3/8 | 3/8" | .387 | |
HTG-7/16 | 7/16" | .450 | |
HTG-1/2 | 1/2" | .512 | |
HTG-5/8 | 5/8" | .640 | |
HTG-3/4 | 3/4" | .768 | |
HTG-7/8 | 7/8" | .893 | |
HTG-1 IN | 1" | 1.01 |