PRODUCT SEARCH
Weico P/N:
Alpha / Belden :
Mil Spec:
UL Styles:
Design Parameters:
Chat software by BoldChat

SVI M23053/13 Class 1

HEAT SHRINKABLE TUBINGS

VITON® FLUOROELASTOMER
2:1 SHRINK RATIO
200°C Operating Temperature
DESCRIPTION:

WEICO's SVI series is an irradiated and modified fluoroelastomer
heat shrinkable tubing. When heated in excess of 175°C, the tubing
will rapidly shrink to fifty percent of its supplied diameter. SVI offers
outstanding abrasion and cut-through resistance and can withstand
a wide variety of fuels, lubricants, acids and highly corrosive fluids at
temperatures up to 200°C. In addition to its high continuous operating
temperature and chemical resistance properties, this tubing is very
flexible and is easily marked by hot-stamp or print-wheel methods.
The outstanding high temperature fluid performance of Viton®
Fluoroelastomer has resulted in their selection as protective wiring
and component covers in aircraft/aerospace applications including
electronic control systems and hydraulic fluid transport mechanisms
and in chemical plants.

CHARACTERISTICS:

SVI tubing meets MIL-I-23053/13 and MIL-R-46846, Type III, Class 1.
SVI is rated for continuous operation from -55°C to +200°C.

SPECIFICATIONS:

 

PACKAGING:

  • Spools
  • Cut to customer specifications

Click Here To Download The Spec Sheet

COLOR:

  • Black


*Click on a part number below for pricing and ordering online

TYPICAL PROPERTIES
SVI Series
 
PHYSICAL
Tensile Strength: 2400 PSI
Ultimate Elongation: 450%
Longitudinal Change: +1%, -10%
Specific Gravity: 1.7
Heat Shock: (4 hrs. @ 300°C) - No dripping, cracking
Low Temp. Flexibility: (4 hrs. @ -55°C) - No cracking
Flammability: Self-extinguishing
Abrasion Resistance: Excellent

ELECTRICAL
Dielectric Strength: 500 V/mil
Volume Resistivity: 10¹² ohm-cm

CHEMICAL
Corrosion Resistance: Non-Corrosive
Fluid Resistance:
Fuels and Oils - Excellent
Solvents - Excellent
Acids & Alkalies - Excellent
Fungus Resistance: Non-nutrient
Item Name MILITARY NO. EXPANDED ID. MIN (INCHES) RECOVERED ID. MAX (INCHES) RECOVERED NOM. WALL THICK. (IN) Compare
SVI-1/8 - .125 .062 .030
SVI-3/16 M23053/13-001-0 .187 .093 .035
SVI-1/4 M23053/13-002-0 .250 .125 .035
SVI-3/8 M23053/13-003-0 .375 .187 .035
SVI-1/2 M23053/13-004-0 .500 .250 .035
SVI-5/8 M23053/13-005-0 .625 .312 .042
SVI-3/4 M23053/13-006-0 .750 .375 .042
SVI-7/8 M23053/13-007-0 .875 .438 .049
SVI-1 M23053/13-008-0 1.00 .500 .049
SVI-1 1/4 M23053/13-009-0 1.25 .625 .055
SVI-1 1/2 M23053/13-010-0 1.50 .750 .055
SVI-2 M23053/13-011-0 2.00 1.000 .065

Viton® is a registered trademark of DuPont Performance Elastomers